Need help?Do you have a question about the OHAUS PA313 and is the answer not in the manual?
General| Capacity | 310 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Net Weight | 1.5 kg |
| Interface | RS232 |
| Calibration | External |
| Power Supply | AC Adapter or Batteries |
| Repeatability (Std. Dev.) | 0.01g |
| Operating Temperature Range | 10°C to 40°C |
| Units of Measurement | g, oz |
Overview of the service manual's content and structure.
Requirements for the environment where balance servicing is performed.
Lists special and standard tools needed for balance maintenance.
Details technical specifications for various Pioneer balance models.
Information on basic balance operation and mechanical functions.
Instructions for connecting a computer via the RS232 interface.
Table of commands for serial communication with the balance.
Guidelines for evaluating balance condition and performance.
A guide to help locate problem areas and probable causes.
List of error codes, their probable causes, and remedies.
Precautionary steps for careful handling, storage, and cleaning.
Procedures for opening the balance to access components.
Detailed steps for removing and disassembling load cells.
Overview of operational and performance tests after servicing.
Procedure for checking basic balance functionality.
Procedure to verify all display segments are functioning correctly.
Details on precision, off-center load, repeatability, and linearity tests.
Exploded view and parts list for the Precision Round Pan Balance.
Exploded view and parts list for the Precision Round Pan, InCal Balance.
Exploded view and parts list for the Precision Square Pan, InCal Balance.
Exploded view and parts list for the Precision Draft Shield Balance.
Exploded view and parts list for the Analytical Balance.
Exploded view and parts list for Precision Load Cells.
Exploded view and parts list for Analytical Load Cells.
Exploded view and parts list for Block Style Load Cells.
Overview of Span and Linearity calibration types.
Procedure for standard span calibration of the balance.
Procedure for standard linearity calibration of the balance.
Steps to access the service menu for advanced calibration.
Test for A/D circuit performance and stability.
Procedure for service-level span calibration.
Procedure for three-point linearity calibration.
Procedure for five-point linearity calibration.
To Next Page
