EasyManua.ls Logo

OHAUS Ranger R21PE1502 - User Manual

OHAUS Ranger R21PE1502
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ranger™ 2000 Series
Instruction Manual

Questions and Answers

  • D
    Deborah RobertsonAug 16, 2025
    How to fix CAL E on OHAUS Scales?
    • R
      Robert ChristianAug 16, 2025
      CAL E on OHAUS Scales can be caused by a calibration error, an unstable environment, or using an incorrect calibration weight. The calibration value might be outside of the allowed limits. Move the scale to a more suitable location and use the correct calibration weight.
  • E
    Ethan PeckAug 19, 2025
    How to fix Err 8.5 on OHAUS Ranger R21PE1502?
    • J
      John FordAug 19, 2025
      Err 8.5 on OHAUS Scales indicates that the tare is out of range. Adjust the tare value to be within the acceptable range.
  • A
    Alexandra NewtonAug 22, 2025
    What to do if OHAUS Ranger R21PE1502 cannot turn on?
    • C
      Christina SmithAug 22, 2025
      If your OHAUS Scales cannot turn on, it may be due to no power reaching the scale. Verify the connections and voltage.
  • E
    Emily ParsonsAug 26, 2025
    What does Lo.ref mean on OHAUS Ranger R21PE1502 Scales and how to solve it?
    • T
      Travis RamseyAug 26, 2025
      Lo.ref on OHAUS Scales is a low reference weight warning. Increase the reference weight.
  • T
    Taylor WrightAug 28, 2025
    What does ref.err mean on OHAUS Scales and how can I resolve it?
    • S
      Steven WilsonAug 28, 2025
      Ref.err on OHAUS Scales indicates an unacceptable reference weight. The reference weight is too small; the weight on the pan is too small to define a valid reference weight. Increase the reference weight.
  • B
    bbrownAug 31, 2025
    Why OHAUS Ranger R21PE1502 show poor accuracy?
    • T
      twareAug 31, 2025
      Poor accuracy in OHAUS Scales can occur due to improper calibration or an unstable environment. To resolve this, perform a calibration. Also, move the scale to a more suitable location.
  • A
    allisonbakerSep 3, 2025
    What to do if OHAUS Scales battery icon is flashing?
    • A
      Antonio SchneiderSep 3, 2025
      If the battery icon on your OHAUS Scales is flashing, it indicates a low battery. Connect the scale to AC power to charge the battery.
  • M
    Monica TorresSep 6, 2025
    What to do if OHAUS Ranger R21PE1502 Scales cannot access mode?
    • J
      Jason YoungSep 6, 2025
      If you cannot access a mode on your OHAUS Scales, the mode may not be enabled. Enter the menu and enable the mode.
  • A
    Amy RiveraSep 9, 2025
    What to do if OHAUS Ranger R21PE1502 Scales cannot access unit?
    • D
      Donna MurraySep 9, 2025
      If you cannot access a unit on your OHAUS Scales, the unit may not be enabled. Enter the menu and enable the unit.
  • C
    Christine MccoySep 12, 2025
    Why OHAUS Scales battery fails to charge fully?
    • A
      Alexander MercerSep 12, 2025
      If your OHAUS Scales battery fails to charge fully, the battery may be defective. Have the battery replaced by an Ohaus authorized service dealer.

OHAUS Ranger R21PE1502 Specifications

General IconGeneral
ModelRanger R21PE1502
Maximum Capacity1500 g
Readability0.1 g
MaterialStainless Steel
CalibrationExternal Calibration
DisplayLCD
Protection RatingIP54
Housing MaterialABS Plastic
Legal for TradeYes
Power SourceAC Adapter
InterfaceRS232
Unitsg, kg, lb, oz
Operating Temperature0°C to 40°C

Related product manuals