To Next Page
M
Monica JimenezAug 20, 2025
How to troubleshoot OHAUS RANGER 4000 that will not turn on?
- JJason HendersonAug 20, 2025
If your OHAUS Scales will not turn on, ensure that the scale has power. Check the connections and verify the voltage.
How to troubleshoot OHAUS RANGER 4000 that will not turn on?
If your OHAUS Scales will not turn on, ensure that the scale has power. Check the connections and verify the voltage.
What to do if my OHAUS RANGER 4000 Scales show Err 8.3?
If the OHAUS Scales display shows 'Err 8.3', it means the weight reading exceeds the overload limit. Reduce the weight on the scale to be within the specified range.
What does Err 8.5 mean on OHAUS RANGER 4000 Scales and how to fix it?
If the OHAUS Scales display shows 'Err 8.5', it means the tare value is out of range. Adjust the tare value to ensure it falls within the acceptable limits.
Why is the battery icon flashing on my OHAUS RANGER 4000 Scales?
If your OHAUS Scales show a flashing battery icon, it indicates a low battery. Connect the scale to AC power to charge the battery.
What does Err 8.6 mean on OHAUS Scales?
If the OHAUS Scales display shows 'Err 8.6', it means the weight exceeds 6 digits. Reduce the weight on the scale to be within the display limit.
Why are my OHAUS RANGER 4000 Scales showing poor accuracy?
If your OHAUS Scales are not accurate, it might be due to improper calibration or an unstable environment. Try performing a calibration procedure. If the issue persists, move the scale to a more stable location.
What does Err 8.4 mean on OHAUS RANGER 4000 Scales and how do I resolve it?
If the OHAUS Scales display shows 'Err 8.4', it indicates that the weight reading is below the underload limit. Increase the weight on the scale to be within the specified range.
What does Err 8.1 mean on OHAUS RANGER 4000 Scales?
If the OHAUS Scales display shows 'Err 8.1', it means the weight reading exceeds the Power On Zero limit. Ensure the weight is within the acceptable range when powering on the scale.
What does Err 8.2 mean on OHAUS RANGER 4000 Scales and how to fix it?
If the OHAUS Scales display shows 'Err 8.2', it means the weight reading is below the Power On Zero limit. Ensure the weight is within the acceptable range when powering on the scale.
What does CAL E mean on OHAUS RANGER 4000 Scales?
If your OHAUS Scales display shows 'CAL E', this indicates a calibration error. This may be caused by: * A calibration value outside of the allowed limits * An unstable environment * An incorrect calibration weight Move the scale to a more suitable location, and use the correct calibration weight.
Defines signal words and symbols used for safety notes and warnings.
Lists essential safety precautions for operating the scale.
Explains how to use the level indicator and adjust feet for accurate weighing.
Instructions for connecting the scale to AC power or battery.
Overview of the scale's control panel and button functions.
Instructions for comparing items against target weight ranges.
Procedure for weight-based comparison within target ranges.
Procedure for performing scale calibration to ensure accuracy.
Lists and explains various scale parameters that can be configured.
Steps for verification and sealing, including LFT switch settings.
Overview of the verification and sealing process by officials.
Safety warnings and instructions for cleaning the scale.
Lists common problems, causes, and remedies for scale issues.
General| Readability | 0.1 g |
|---|---|
| Display | LCD with backlight |
| Power Supply | AC adapter |
| Battery Life | 100 hours |
| Legal for Trade | Yes |
| Protection | IP54 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Relative Humidity | 10% |
| Interface | RS232 |
| Units of Measurement | g, kg, lb, oz |
