What to do if I cannot access a mode on my OHAUS Scales?
If you cannot access a specific mode on your OHAUS Scales, it is likely that the mode is not enabled. Go to the menu and enable the desired mode.
What to do if I cannot access a unit on my OHAUS Scales?
If you cannot access a specific unit on your OHAUS Scales, it is likely that the unit is not enabled. Go to the menu and enable the desired unit.
What does Lo.ref mean on OHAUS RANGER 4000?
If your OHAUS Scales display shows 'Lo.ref', it means there is a low reference weight warning. Increase the reference weight used.
What does ref.err mean on OHAUS RANGER 4000 Scales?
If your OHAUS Scales display shows 'ref.err', it indicates an unacceptable reference weight. The reference weight is too small. Increase the reference weight.
General| Readability | 0.1 g |
|---|---|
| Display | LCD with backlight |
| Power Supply | AC adapter |
| Battery Life | 100 hours |
| Legal for Trade | Yes |
| Protection | IP54 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Relative Humidity | 10% |
| Interface | RS232 |
| Units of Measurement | g, kg, lb, oz |
Defines signal words and symbols used for safety notes and warnings.
Lists essential safety precautions for operating the scale.
Explains how to use the level indicator and adjust feet for accurate weighing.
Instructions for connecting the scale to AC power or battery.
Overview of the scale's control panel and button functions.
Instructions for comparing items against target weight ranges.
Procedure for weight-based comparison within target ranges.
Procedure for performing scale calibration to ensure accuracy.
Lists and explains various scale parameters that can be configured.
Steps for verification and sealing, including LFT switch settings.
Overview of the verification and sealing process by officials.
Safety warnings and instructions for cleaning the scale.
Lists common problems, causes, and remedies for scale issues.
To Next Page
