Need help?Do you have a question about the OHAUS RC31P6 and is the answer not in the manual?
Explains signal words and symbols for safety warnings and product information.
Lists essential safety precautions to follow for operating the scale.
Lists all items included in the scale package.
Details how to install the sub-platform and metal pan onto the scale.
Provides guidance on selecting a location and leveling the scale properly.
Describes connecting AC power, battery charging, and operation.
Describes the control panel layout and LCD displays of the Ranger Count 3000.
Details the functions of each button on the control panel as per Table 3-1.
Explains the meaning of various symbols displayed on the LCD screen as per Table 3-2.
Explains the function of LED indicators used in Checkweigh mode.
Illustrates the bottom view of the scale, showing ports and a lock switch.
Provides instructions on how to power the scale on and off.
Explains how to use the scale for counting applications, including APW.
Covers accumulating displayed values and viewing/clearing statistical data.
Describes setting up and using the check-weighing mode with target weight ranges.
Explains check-counting setup and its Positive, Negative, and Zero Check methods.
Covers storing, retrieving, editing, and clearing records in the scale's memory.
Explains how to navigate through the scale's menu system.
Describes the function of navigation buttons (Yes, No, Back, Exit) within menus.
Details the process of performing an initial span calibration for accurate results.
Describes Zero, Span, Linearity, and GEO calibration procedures.
Details parameters like Reset, Dual Scale, Capacity, Graduation, Power Unit, Zero Range, Auto Opt.
Configures automatic tare, beeper options, and signals.
Sets accumulation functionality and exits the setup menu.
Covers Reset, Stable Range, Filter, AZT, Light, and Auto Off settings.
Configures Reset, Stable Only, Auto Print, and Content for printing.
Defines which data fields (Result, Gross, Net, Tare, Header, Footer, etc.) are printed.
Sets print layout, paper feed, and enables data transfer to PC.
Provides instructions for setting up data transfer from Windows XP.
Prints the library data.
Configures Reset, Baud Rate, Parity, Stop Bit, and Handshake.
Defines alternate commands and exits COM menus.
Locks menus like Cal, Setup, Readout, Unit, Print, and COM.
Locks the Print and COM menus.
Instructions for using the weigh below feature with an optional hook.
Describes the installation of capacity labels near the display.
Steps to perform before verification and sealing for legal trade use.
Outlines the process for verification and sealing by authorized personnel.
Details the application of physical security seals for tampering prevention.
Explains the audit trail sealing method and event counters.
Provides guidelines for cleaning the scale housing and control panel.
Lists common problems, their possible causes, and remedies.
Provides contact information for service assistance and technical support.
Lists available accessories for the Ranger Count 3000 series.
Details the technical specifications of the Ranger Count 3000 series models.
Provides dimensional drawings of the scale.
Lists commands for communicating with the scale via RS232 interface.
Describes the pin connections for the RS232 port.
Shows sample printouts generated by the scale.
Defines the format for weight string printing.
Provides information regarding verified weighing instruments and their markings.
To Next Page
General
