What to do if my OHAUS SJX323 cannot turn on?
If your OHAUS Scales are not turning on, the issue might be due to a lack of power to the balance. Ensure the scale is properly connected to a power source.
Why are my OHAUS Scales showing poor accuracy?
Poor accuracy in OHAUS Scales can stem from a couple of reasons. First, the scales might need calibration. Second, an unstable environment could be affecting the readings.
What does Err 8.1 mean on OHAUS SJX323 Scales?
If your OHAUS Scales display Err 8.1, it means the weight exceeds the power on zero range.
What does Err 8.2 mean on OHAUS Scales?
If your OHAUS Scales display Err 8.2, it indicates that the weight is below the power on zero range.
What does Err 8.4 mean on OHAUS SJX323 Scales?
If your OHAUS Scales show Err 8.4, it means there is an under load condition, possibly because the pan has been removed.
What does Err 8.6 mean on OHAUS SJX323 Scales?
If your OHAUS Scales display Err 8.6, the displayed value exceeds 999999, which can happen in Totalization mode.
What does Err 8.7 mean on OHAUS SJX323 Scales?
If your OHAUS Scales are showing Err 8.7, this indicates an unknown internal weight position.
What does ref.err mean on OHAUS Scales?
The error ref.err on OHAUS Scales means there is a parts counting or percentage error, where the sample weight is less than 1d. The balance will show an error, then exit parts counting or go to [Clr.APU].
What does Lo.ref mean on OHAUS Scales?
Lo.ref on OHAUS Scales indicates that the Percent Reference weight or APW is too low for accurate results.
What does USB.Err mean on OHAUS Scales?
USB.Err on OHAUS Scales means that the device cannot find the menu or app file in the U-disk.
General| Capacity | 320 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | Ø 90 mm |
| Calibration | External |
| Power Supply | AC Adapter (Included) |
| Linearity | ± 0.002 g |
| Stabilization Time | 2 seconds |
| Display | LCD |
| Interface | RS232 |
| Weighing Units | Ounce |
| Operating Temperature | 10°C – 40°C |
| Units | g, oz |
| Repeatability | ± 0.001 g |
To Next Page
