To Next Page
A
andrewscrystalAug 21, 2025
Why OHAUS Scales cannot turn on?
- JJennifer MartinezAug 21, 2025
If your OHAUS Scales cannot turn on, it may be due to no power reaching the balance.
Why OHAUS Scales cannot turn on?
If your OHAUS Scales cannot turn on, it may be due to no power reaching the balance.
Why OHAUS SPX2201 Scales show Err 8.6?
The Err 8.6 error on OHAUS Scales indicates that the displayed value exceeds 999999, which is possible in Totalization mode.
What does USB.Err mean on OHAUS SPX2201 Scales?
USB.Err on OHAUS Scales means that the menu or app file cannot be found in the U-disk.
What does CAL E mean on OHAUS SPX2201 Scales?
CAL E on OHAUS Scales means that the calibration failed.
Why OHAUS SPX2201 Scales display Lo.ref?
The Lo.ref message on OHAUS Scales indicates that the Percent Reference weight or APW is too low for accurate results.
Why OHAUS SPX2201 Scales are showing poor accuracy?
Poor accuracy in OHAUS Scales can be caused by improper calibration or an unstable environment.
Why OHAUS Scales show Err 8.3?
The Err 8.3 error on your OHAUS Scales indicates an overload, meaning the weight on the scale exceeds its rated capacity.
What to do if OHAUS SPX2201 show 'Err 8.3'?
If your OHAUS Scales display the error message 'Err 8.3', it means the weight on the scale exceeds its rated capacity. To resolve this, remove the excess weight from the scale.
How to fix OHAUS SPX2201 that will not turn on?
If your OHAUS Scales won't turn on, the issue might be due to a lack of power. Check the power supply to ensure it is properly connected and functioning.
Why OHAUS Scales cannot calibrate?
If your OHAUS Scales cannot calibrate, it might be because the security switch is in a locked position.
Lists critical safety warnings and precautions for installation and operation of the balance.
Steps for releasing the transportation lock and installing the weighing pan.
Instructions on how to properly level the balance using the indicator.
Details on AC adapter and battery installation for powering the balance.
Explains the requirement and procedure for initial balance calibration.
Identifies the balance control panel buttons and their primary functions.
Outlines the procedure for performing span calibration on the balance.
How to use the balance in its default weighing mode.
Accessing and performing span and linearity calibrations.
General| Capacity | 2200 g |
|---|---|
| Readability | 0.1 g |
| Linearity | ±0.2 g |
| Stabilization Time | 1.5 s |
| Calibration | External |
| Display | LCD |
| Repeatability | 0.1 g |
| Operating Temperature Range | 10°C to 40°C (50°F to 104°F) |
| Power | AC Adapter (Included) |
| Units of Measurement | g, oz |
| Net Weight | 1.5 kg |
| Interface | RS232 |
