ohmex STI 7990 - Appliance Preparation; Water Tank Filling

2
1
13
MAX
MAX
2,3
14
2
2
82
STI 7990
EN
APPLIANCE PREPARATION
• Press the lever (13) to remove the water tank (2)
from the appliance body (1).
• Remove the descaling lter (14).
• Pour water in the tank (2) until you reach the
“MAX” sign indicated on it (max 2,3 l).
Do not exceed the MAX level indicated
on the tank.
To ll the tank (2) use tap water.
In the case water is particularly hard, to mix it with the same amount of
distilled water is advised.
Do not pour fragrances, vinegar, starch, descalers, ironing products or other
chemical products in the tank (2).
> > > >