ohmex STI 7990 - Cleaning and Maintenance; General Cleaning Precautions; Plate and Tank Cleaning

1
89
STI 7990
EN
Before starting the cleaning,
always disconnect the plug from
the power outlet and wait dor the
plate to be completely cooled.
• For the external parts cleaning use a wet cloth.
Never wash either the appliance body or the iron under running
water and do not immerse them in water or other liquids.
• After every use, clean the plate (1) when it’s still hot letting
it slide on a wet cloth placed on the ironing board, bringing
a little pressure.
Do not clean the steam iron plate (1) with
corrosive or abrasive products. Use ONLY
specic products commercially available.
• Periodically rinse the inside of the tank (2) with water.
Don’t use chemical additives or vinegar.
CLEANING AND MAINTENANCE