ohmex STI 7990 - First Use and Setup; Initial Setup Steps; Ergonomic Ironing Position

4
5
8
7
5
3
81
STI 7990
EN
• Remove any adhesives or protective sheets from the plate (9) and clean it with a soft
cloth.
• Unroll the power cord and the steam pipe (7) completely.
• Place the appliance body (1) on a stable and at surface.
• Place the iron (8) on the appropriate support (3).
• Press both buttons (5) to release the
handle (4) and lower it.
• Set the iron at the correct height.
When you’re standing up, the distance
between the elbow and the ironing
board must be of approximately
25÷30 cm.
• The iron handle tilted upwards allows
to keep your wrist in a comfortable
position.
APPLIANCE PREPARATION
Fill the tank (2)
Never immerse the appliance body (1) in water.
To disconnect the plug from the
wall outlet is advised.
FIRST USE