Oilon GP-350 - User Manual

118 pages

Save Page as PDF

To Next Page

M4248 2316EN

5 May 2023

Operation and maintenance manual

Burner models: GP-350 M - 450 M

Burner equipment: WDx00, FGR (UL)

Read these instructions carefully before installation, use, or maintenance

Main Page

Table of Contents3
Introduction5
Liability Disclaimer5
Safety Precautions5
Product Overview9
Flue Gas Recirculation (Optional)11
Handling and Storing12
Technical Data13
Burner Technical Data13
Other Technical Data and Requirements14
Burner Control Technical Data15
Servomotor Technical Data17
Display and Operating Unit Technical Data17
Module Technical Data (WD200)17
Oxygen Sensor Technical Data (WD200)18
Flame Detector Technical Data18
Installation20
Space Requirements20
Removing Protective Covers and Lifting the Burner20
Installing Burner22
Combustion Head and Masonry Dimensions24
Gas Valve Selection Table26
Installing Burner to Gas Supply Line26
Installing Gas Pressure Regulating Assembly28
Changing the Fuel Type from Natural Gas to LPG29
Installing FGR Duct System30
Electrical Connections32
Commissioning34
First Start-Up34
Adjusting Combustion Head (GP)36
Adjusting Combustion Air (GP-450 M)38
Adjusting Combustion Differential Air Pressure Switch39
Adjusting Gas Pressure Switch41
Setting Gas Pressure Regulator SKP42
Setting Gas Pressure Regulator FRS43
Measuring Gas Pressure46
Operating and Display Unit Menu49
Adjusting Operating and Display Unit Settings52
Variable Speed Drive Settings and Standardization (WD200)53
Checking O Module (WD200)54
Manual Start-Up and Program Stop in Pre-Purge Position55
Ignition Position57
Setting Ratio Curve58
Activating FGR63
Setting FGR Curve Points63
Measuring FGR65
Capacity Range66
O2 Min. Value Control (WD200)67
Setting O Trim Control (WD200)69
O2 Trim Control Operating Mode (WD200)70
O 2 Trim Control Load Limitation (WD200)71
Trim Control When Load Changes (WD200)72
Setting Capacity Controller Operating Mode72
Setting Load Controller Parameters73
Capacity Controller On/Off77
Boiler Temperature Limiting with Burner Control78
Cold Start Thermal Shock Protection78
Measuring Flue Gas and Combustion Air Temperature (WD200)79
Activating O Trim Control (WD200)80
Backing up Parameters80
Operation81
Wisedrive System81
Control Panel84
Legend to PI Diagrams85
Burner Operation and PI Diagram, Gas86
Legend to Time Sequence Diagrams88
Time Sequence Diagram, Gas Use91
Burner Automation Description, Gas Use93
Gas Valve Proving96
Maintenance97
Burner Maintenance97
Maintenance During Shutdown99
Dismounting Combustion Head100
Dismounting and Changing Burner Motor101
Assigning Servomotors102
Dismounting and Changing Servomotors103
Fault and Lockout History105
Testing Safety and Control Devices107
Troubleshooting110
Troubleshooting Error Codes113
Burner Parts (GP)114
Burner Part List115

Brand	Oilon
Model	GP-350
Category	Burner
Language	English

Oilon GP-350 - User Manual

Table of Contents

Oilon GP-350 Specifications

Related product manuals