12
Server, and prohibit riding until the fault is resolved. You can refer to Chapter 4.1 <Fault Code> to
solve the corresponding error
Riding mode adjustment: soft mode and sport mode
In order to cater to the riding experience of different groups of people, the ECU of OKAI
scooters adopts two different riding modes: in the soft mode, the acceleration is slower; in the
sport mode, the acceleration is faster. Users can switch between different modes through IOT to
fully experience the riding effect of OKAI scooters.
Fault Code
⚫ When OKAI ECU receives the unlocking command, it will automatically detect whether the
vehicle wire is short-circuited, whether the MOS is damaged, etc., if an abnormality is
detected, the error code will be displayed on the instrument and reported to the server
through IOT
⚫ OKAI ECU will monitor the status of the scooter in real time when riding. When the motor
is overheated and the MOS driven by the ECU is overheated, it will display the error code
on the meter and report it to the server through IOT. Riding is prohibited to protect user
safety.
To Next Page
Loading...
