OPERATOR PANELS > 20
Printer Setup Tab
Selecting this tab provides access to the Printer Menu button, which,
when selected, enables configuration of the printer settings via a
series of tabs described in outline below. At all stages, detailed on-
line help is provided via the Help
HelpHelp
Help button.
1. Paper
PaperPaper
Paper: set paper size for standard tray, secondary tray, MPF
and manual feed, tray sequence and default number of copies.
2. Layout
LayoutLayout
Layout: set paper cassette size, printer emulation, lines per
page and paper orientation.
3. Quality
QualityQuality
Quality: set resolution (dpi), smoothing and darkness.
4. Economy
EconomyEconomy
Economy: set power save delay, toner save, auto eject time,
manual timeout, low toner action and jam recovery.
5. Test Print
Test PrintTest Print
Test Print: print demo page, printer menu setting list, a list of
available fonts and clean the printer.
6. Memory
MemoryMemory
Memory: set raster buffer (normally set to auto
autoauto
auto) and confirm
buffer size.
7. Maintenance 1
Maintenance 1Maintenance 1
Maintenance 1: configure printer serial and parallel
interfaces, clearable warning timing and reset drum counter
and menu.
To Next Page
Loading...
