PAPER RECOMMENDATIONS > 35
INSTALLING PAPER
1. Remove the paper tray from the bottom of the printer and
place plain paper in the tray, keeping the level of the paper in
the tray below the guide arrowheads shown on the paper
guides (1).
NOTE
If you are topping up the paper in a paper tray, it is recommended that
you remove the remaining paper from the tray first then add the new
paper stock followed by the paper you removed. This ensures that the
oldest paper is used first to help prevent paper jams.
NOTE
Load letter headed paper face down and top edge towards the front of
the paper tray.
2
3
1
4
To Next Page
Loading...
