Daily Care > 47
Correct Moving Procedure
Carry out the following procedure when moving the printer.
1. Press the power switch of this printer to the <O> position to switch the power off.
2. Remove all cords, such as the power cord and interface cables.
3. Remove any paper in the centre output tray and return the paper stopper to its
original position if it is raised.
4. Pull out the paper tray from the printer and remove any paper in the tray.
Keep the paper wrapped and away from humidity and dirt.
5. Push the paper tray completely into the printer.
6. Open cover A but do not touch any parts inside the printer.
7. Hold the drum/toner cartridge by the grip and pull it out slowly.
8. Close cover A securely.
9. Lift the printer and move it gently. If the printer is to be moved over a long distance,
pack it inside a box.
CAUTION!
> It is necessary to uninstall the drum/toner cartridge. If you move
the printer with the drum/toner cartridge installed, the toner
may spill out inside of the machine.
> Do not shake the drum/toner cartridge after uninstalling it from
the printer. The toner will spill.
> Put the uninstalled drum/toner cartridge back into its original
bag or wrap it with a thick cloth to prevent it from being exposed
to strong light.
To Next Page
Loading...
Need help?
General
