31
Jam at G (Optional Finisher)
1. If visible, pull the jammed paper
out of the stacker upper tray
2. Open Door G.
3. Depending on the instructions
shown on the display, open handle
2a, handle 2b, or handle 3 as
shown on the instruction labels.
4. Note: If the stapler is in the way,
slide the stapler toward you, then
to the right.
5. If you opened handle 2a or handle
2b, rotate knob 2c counter
clockwise as needed.
6. Pull the jammed paper out of the
printer. Be sure that all paper
fragments are removed.
7. Close the handles that were opened
8. Close Door G.
Jams
Jam at Location “G”
To Next Page
Loading...
Need help?
General
