Network User’s Guide
77
TCP/IP Connection
1. Launch Printer Setup Utility
This is located in the Applications > Utilities folder.
2. Click Add….
3. Click the IP Printer button.
4. From the Protocol menu, choose Line Printer Daemon
– LPD.
5. Enter the printer’s IP address in Address.
6. Check the correct PPD file for your printer is selected in
the Print Using menu.
7. Click Add....
You will be prompted to configure any additional printer
hardware options. If your printer has options such as a
hard disk or second tray, switch on the relevant options.
8. Click Continue.
9. Quit Printer Setup Utility.
To Next Page
Loading...
Need help?
General
