Oki C301 Maintenance Manual

44951501TH Rev.2
3-17
Oki Data CONFIDENTIAL
3. INSTALLATION
(3) Installation of an SD card (C531dn only)
Note!
• Fonts cannot be downloaded to any SD cards
for C531dn.
• Even in the power-off status, when the AC cord
is connected, a part of the circuit is operated,
therefore, make sure to unplug the cable.
SD cards are provided as an option for C531dn.
• SD memory card (model name: SDC-A1)
It is a storage added to C531dn printers. It is used for authenticated printing, print
job saving and buffer printing, or used when [Collating Error] appears in making
collated sets of copies.
1. Turn off the printer and disconnect the power cord.
Turn off the printer by following the steps described under “Turning off the power” in
section 3.5.2.
Note! • Turning off the power without taking proper shutdown steps may cause a
failure of the printer, so be sure to execute the shutdown menu.
• Installation of an SD card with the power on may cause a failure of the
printer.
2. Remove the connector cover.
Connector cover
Lock
4. Touch the metal part of the printer to discharge static.
3. Remove the printer cable.
5. Loosen the screw and remove the bracket.
Printer cable
Metal part
Bracket
Screw

Oki C301 Specifications

General

Print Speed (Color)	20 ppm
Monthly Duty Cycle	30, 000 pages
Memory	128 MB
Paper Capacity	250 sheets
Duplex Printing	Manual
Print Technology	LED
Connectivity	USB 2.0, Ethernet
Printer Type	Color
Media Size	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes
Operating System Compatibility	Windows, Mac