44951501TH Rev.2
7-71
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING
2. On the General tab of the displayed Certificate information window, press the Install
Certificate… button.
3. After the Certificate Import Wizard appears, install a certificate by following the on-
screen procedure. Select “Automatically select the certificate store based on the
types of certificate,” so that the certificate will be installed automatically.
7.5.4.5.7 The error message “Name of security certificate is invalid
or does not match the site name” is displayed.
It means that the printer IP address is different from the IP address that is described on a
certificate or from the IP address used when the certificate was created.
Solution: Change the printer IP address back to the IP address used when a
self-signed certificate was created or to the IP address used when a
CSR was created.
To Next Page
Loading...
