Menu functions > 27
PAPER FEED TRAY1
TRAY2
MP TRAY
Selects the default tray for paper feed,
Tray 1 (upper), Tray 2 (lower, if
installed) or MP Tray (multi purpose
tray).
AUTO TRAY
SWITCH
ON
OFF
If two trays contain identical paper, the
printer can switch to an alternative
source when the current tray runs out
in the middle of a print job.
TRAY SEQUENCE DOWN
UP
PAPER FEED
TRAY
Determines tray sequence order when
automatically switching.
MP TRAY USAGE DO NOT USE
WHEN
MISMATCH
If a document to be printed demands a
paper size not installed in the selected
tray, the printer can automatically feed
from the multi purpose tray instead. If
this function is not enabled, the printer
will stop and request the correct size of
paper to be loaded.
MEDIA CHECK ENABLE
DISABLE
Determines whether the printer check
the size of paper loaded matches that
required for the document sent to print.
RESOLUTION 600DPI
600 x
1200DPI
600DPI M-
LEVEL
Sets the default resolution for printing
(dots per inch). 600x1200DPI uses
more memory and requires more time
to process, but prints at a higher
quality.
TONER SAVE
MODE
ON
OFF
Reduces the amount of toner used for
imaging. Toner saving gives lighter
prints but is more economical.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
