Menu functions > 52
FILE SYS
MAINTE2/
CHK ALL
SECTORS
EXECUTE This function can recover an error of
HDD sector information and any
mismatch of the file system noted
above.
Subject to HDD only.
The following message will appear after
the selection.
ARE YOU SURE?
YES/NO
If NO is selected, the display will go
back to the source menu. If YES is
selected, the printer it will
automatically reboot and recover the
file system.
Note 1: It takes from 30 to 40 minutes
for a 10GB HDDto complete this
function.
Note 2:This item appears only when a
HDD is installed.
FILE SYS
MAINTE2/
HDD
ENABLE
DISABLE
If the printer is unable to start with the
HDD installed due, possibly to a fault in
the HDD, the printer can be started as
if it did not have the HDD installed by
setting this menu item to "DISABLE"
Access to the HDD will be failed iin this
condition as it will be considered that
the printer does not have a HDD
installed.
Note :This item appears only when a
HDD is installed.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
