Oki C5750 - Page 54

Menu functions > 54
SIDM MENU/
MANUAL2 ID
0 ~ 3 ~ 9 Set up Pn specified MANUAL by
MANUAL-2 ID No.FX/PPR Emu in CSF
control command(ESC EM Pn).
SIDM MENU/
SIDM MP TRAY
0 ~ 4 ~ 9 Set up Pn specified TRAYO(MP Tray) by
MP Tray ID No.FX/PPR Emu in CSF
control command(ESC EM Pn).
SIDM MENU/
SIDM TRAY1
0 ~ 1 ~ 9 Set up Pn specified TRAY 1by Tray 1 ID
No.FX/PPR Emu in CSF control
command(ESC EM Pn).
SIDM MENU/
SIDM TRAY2
0 ~ 2 ~ 5 ~9 Set up Pn specified TRAY 2 by Tray 2 ID
No.FX/PPR Emu in CSF control
command (ESC EM Pn).
CHANGE
PASSWORD/
NEW
PASSWORD
xxxxxxxxxxxx
Set a new password for entering the
administrator’s menu.
Password should be from 6 to 12 digits
of alpha/numeric characters (or mix)
The default value is "aaaaaa"
The printer will restart after the ADMIN
MENU.
CHANGE
PASSWORD/
VERIFY
PASSWORD
xxxxxxxxxxxx
Verification of above.
PARTITION
SIZE/
PCL/COMMON/
PSE
nnn%mmm%lll% Sets up the partition size.
nn,mm,ll should be 1~98% and
nn+mm+ll = 100%.
The display for changing partition size
will blink. Press BACK/ENTER button to
confirmof changed location. The
following confirmation message will be
displayed by pressing ENTER switch in
the last column.
ARE YOU SURE?
YES/NO
If NO is selected, the display will go
back to the source menu. If YES is
selected, the printer will automatically
reboot. At the same time, the HDD will
change partition size and initialise.
(Changing one partition size
automatically affects other partition
size).
ITEM SETTINGS EXPLANATION