48 – C610/C711 User’s Guide
EPSON FX
Setup
Character
Pitch
10 CPI/12 CPI/
17 CPI
20 CPI/
Proportional
Specifies character pitch in
Epson FX emulation.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol Set IBM 437 Sets the Symbol Set for Epson
FX Emulation.
(see machine operator panel for
complete list).
Letter O
Style
Enable/Disable Specifies the style that replaces
ø (9B) and ¥ (9D) with ø (ou)
and Ø (zero).
Zero
Character
Normal/
Slashed
Specifies the style of 0(zero).
SLASHED: SLASH ZERO
Line Pitch 6/8 LPI Sets line space.
White Page
Skip
On/Off Sets whether to eject a blank
sheet. Available only when
simplex is set.
CR Function CR/CR+LF Sets action when CR code is
received.
Line Length 80/136 Column Specifies the number of
characters per line.
Form
Length
11/11.7/12 inch Specifies the length of paper.
TOF
Position
0.0/0.1/~1.0
inch
Sets the position from the top
edge of paper.
Left Margin 0.0/0.1/~1.0
inch
Sets the amount to shift the
horizontal print start position to
the right.
Fit to Letter Enable/Disable Sets the printing mode that can
fit print data, equivalent to 11
inches (66 lines), in the LETTER-
size printable area.
Text Hei ght Same/Diff Sets height of a character.
SAME: Regardless of CPI, same
height; DIFF: According to CPI,
character heights vary.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
