Loading paper > 12
3. Load paper (letter headed paper face down and top edge towards the front of the
printer), as shown.
4. Adjust the rear stopper (a) and paper guides (b) to the size of paper being used.
To prevent paper jams:
> Do not leave space between the paper and the guides and rear stopper.
> Do not overfill the paper tray. Capacity depends on the type of paper stock.
> Do not load damaged paper.
> Do not load paper of different sizes or types at the same time.
> Do not pull the paper tray out during printing (except as described below for the
2nd tray).
> Close the paper tray gently.
CAUTION!
IMPORTANT: Set paper size dial (c) to the size of paper being used
(A4 in the above example).
a
b
b
c
To Next Page
Loading...
Need help?
General
