Menu functions > 27
Print Setup
(cont.)
Mono-Print
Speed
Auto
Color Speed
Normal Speed
High Quality
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Prints always at the color print speed if Color is set.
Prints always at the monochrome print speed if Normal is
set.
Prints always at 26ppm of the gradation print speed for
both color and monochrome print if High Quality is set.
Default
Orientation
Portrait
Landscape
Specifies print orientation.
Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
Form Length 5 lines
~
60 lines
~
128 lines
Sets the number of lines that can be printed on a page
Not valid for PS (valid only for PCL/HP-GL2).
Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
paper loaded in the tray.
Edit Size Cassette Size/
Letter/
Executive/
Legal14/
Legal13.5/
Legal13/A4/A5/
A6/B5/Custom/
C5/Com-10
Envelope/
Monarch
Envelope/DL
Envelope/C5/
Com-9 Envelope
Sets the size of an area to draw when the host PC does
not specify the size via the paper edit size designating
command (Not valid for PS - only for PCL).
Trapping Off
Narrow
Wide
Trapping, or spreading and choking, is a prepress
technique consisting of creating small overlaps between
abutting colors in order to mask registration issues in the
graphical production.
Trapping X
Width
0 pixels
~
4 pixels
Sets the horizontal dimension of the trapping area.
Trapping Y
Width
0 pixels
~
4 pixels
Sets the vertical dimension of the trapping area.
X Dimension 64 mm
~
210 mm
~
216 mm
Specifies paper width of Custom paper as a default value.
Sets a paper size at right angles to the paper run
direction.
Y Dimension 127 mm
~
297 mm
~
1220 mm
Specifies paper length of Custom paper as a default value.
Sets a paper size in the same direction as the paper run
direction.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
