Network configuration > 13
D
EVICE
SETUP
Device Setup allows you to configure the network interface. Type
the root password (default value is the last 6 characters of the
MAC address) to configure. Remember that the root password is
case sensitive. If the MAC address contains any alpha characters,
type them as upper case. Device Setup contains details for the
following selectable tabs:
> General >SNMP >IEEE 802.1x
> TCP/IP >POP >NetWare
> SMTP >Ethertalk >Maintenance
> NetBEUI >SSL/TLS
The following section explains each tab’s functionality.
Depending on your printer, some items in the following
explanation may not be displayed.
Setup Create
NetWare
Queue
Create a NetWare queue.
Note: Only visible when using Netware
Delete
NetWare
Object
Delete NetWare object.
Note: Only visible when using Netware
Reset Reset the selected network interface card.
Test Print Print self-diagnostic test pages.
IP Address
Setup
Set static IP address of network interface card
manually.
MENU ITEM FUNCTION
NOTE:
Not all utilities, features or protocols are supported by
every product. Please check with your User’s Guide and
support website for latest information.
To Next Page
Loading...
Need help?
General
