Network configuration > 9
U
SING
T
HE
A
DMIN
M
ANAGER
Q
UICK
S
ETUP
AdminManager Quick Setup utility allows you to configure the
network interface easily and simply without installing any
software packages.
You can configure the following:
> Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI
protocols.
> Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare mode and create Queue/Print Server/Printer
objects.
> Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows XP or Vista operating
system, running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/SPX.
This utility must be used on a PC that is located on the same
segment as the printer.
1. Insert the CD-ROM into
the CD-ROM drive. The
Setup Utility starts
automatically. If it does
not start, double-click
\setup.exe (in the
root directory) on the
CD-ROM.
2. Select the appropriate
language and follow
the on-screen instructions.
3. Accept the Software License Agreement.
4. Select the Optional Utilities tab.
5. Then select Install Admin Manager.
To Next Page
Loading...
Need help?
General
