Network configuration > 23
Maintenance Tab
Daylight Saving When this is selected, one hour is added to the local
time.
ITEM COMMENTS
ITEM COMMENTS
LAN Scale Select NORMAL (the default) or SMALL.
Note: For small scale networks (with no routing), choose
the SMALL setting. For more complex networks choose
NORMAL.
IP Filter Setup… The following items can be configured:
Use IP FIlter Enable/disable IP Filtering. Default is
disabled.
Admin IP
Address
Enter the printer’s IP Address.
IP Address
Range
Set up to 10 IP Filter address ranges:
[IP FIlter Range 1] through [IIP Filter
Range 10].
Printing Enable/disable printing of the
specified IP address range. Default is
disabled.
Configuration Enable/disable changing IP address
ranges. Default is disabled.
To Next Page
Loading...
Need help?
General
