C800 Series Setup Guide
3
Set Up the Printer
Lift printer and place it on the selected
location. The printer weighs approximately
79 lbs.
IMPORTANT!
Other safety information is contained in the
Safety, Warranty and Regulatory
Information booklet supplied with this
product and should be read prior to setting
up the printer.
1 Remove all shipping tape.
2 Remove any packing materials.
Prepare Image Drum
Cartridge
1 Press button and lift the top cover.
2 Remove the black image drum (nearest
the control panel). Lift it out as shown
below.
Note: Do not expose cartridge to light for
more than 5 minutes.
Note: Do not touch shiny green surface at
bottom of drum cartridge.
To Next Page
Loading...
