Network User’s Guide
33
SNTP Tab
In this Tab, you can configure SNTP related items
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
Explanation of SNTP Tab Items
Item Comments
Use SNTP Enable/disable SNTP (Simple Network Time Protocol).
NTP
Server 1
Address
Set the IP address or host name for NTP Server 1.
NTP
Server 2
Address
Set the IP address or host name for NTP Server 2.
Adjust
Interval
Set the interval for sending time update requests to the
server. Select 1 hour (the default), 12 hours or 24 hours.
Local Time
Zone
Set the local time zone from -12:00 to +13:00. Minute
interval is selectable from 00 (the default), 15, 30 or 45.
Daylight
Saving
When this is selected, one hour is added to the local time.
To Next Page
Loading...
Need help?
General
