Network User’s Guide
44
Network Configuration using
TELNET
Example TELNET configuration ________
TELNET requires the print server to have a valid IP address
configured. If the network interface already has an IP address
configured, skip steps 1 to 3 below.
1. Use the PING command to confirm the connection with
the network interface.
Example
For IP address 172.168.20.127:
ping 172.168.20.127
If there is no reply, there is a problem with the configuration
of the IP address (the IP address has been already set
manually or by the DHCP/RARP server), or with the network.
Reset the network interface settings to the default (press the
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
CAUTION!
Please ensure a valid IP address for your
network environment is used. Use of an
incorrect IP address can cause serious problems
on your network.
NOTE
The method of configuring commands may
differ between workstations. Refer to the
workstation’s manual.
To Next Page
Loading...
Need help?
General
