Network User’s Guide
61
Using Bonjour protocol
Bonjour is the preferred protocol for printing data from
the Macintosh environment.
Using NetBEUI protocol
Using NetBEUI makes it easy to manage your Oki
product and print within the network environment of
Windows.
9. When the settings are correct, click Execute. The new
settings are transmitted to the network interface but it
still operates with pre-transmission settings.
10. Click Finish to validate the new settings.
11. Switch the printer off for 15 seconds and on again.
Now that both Windows and the printer have been configured
to use TCP/IP, the next step is to configure Windows to print
to the network printer.
NetBEUI Protocol __________________
Network Printer Settings
There are two configurable items under NetBEUI within the
printer. These can be configured using the standard set-up
utility described in “Device setup” on page 18.
Although there are some differences in configuration options
between the various Windows platforms, the procedure for
printing using NetBEUI is the same.
Please ensure the NetBEUI protocol has been installed in
Windows. This can be confirmed by checking the network
settings. If NetBEUI has not been installed please refer to the
section below.
The relevant Windows installation CD may be required and you
should follow the on-screen dialog box prompts.
Computer Name Name assigned to the printer
Workgroup
PrintServer
1
1. Although the workgroup name can be changed, it is
recommended that it remains as PrintServer.
Comment User definable description
To Next Page
Loading...
Need help?
General
