Oki C831dn - Page 41

- 41 -
Connecting to a Computer
1
1. Setup
10 Press the <BACK> button until
[Admin Setup] is displayed.
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃 䎃 䎃䎃䎔䎒䎗
䎳䏕䏌䏑䏗䎃
䎶䏈䏗䏘䏓
䎳䎶䎃䎶䏈䏗䏘䏓
䎳䎦䎯䎃䎶䏈䏗䏘䏓
䎱䏈䏗䏚䏒䏕䏎䎃䎶䏈䏗䏘䏓
11 Press the scroll button several times
to select [Power Setup], and press the
<ENTER> button.
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗
䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓
䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓
䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓
12 Press the scroll button to select
[Sleep], and press the <ENTER>
button.
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎔䎒䎔
䎶䏏䏈䏈䏓
䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉
䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈
13 Press the scroll button to select
[Disable], and press the <ENTER>
button.
䎶䏏䏈䏈䏓䎃䎃䎃䎃䎃䎃䎃䎃䎃䎔䎒䎔
䎨䏑䏄䏅䏏䏈
䎍䎃 䎃 䎧䏌䏖䏄䏅䏏䏈
14 Press the <ON LINE> button to exit the
menu mode.
 Then, install the printer driver on the
computer.
1 From the Apple menu, select [System
Preferences].
2 Select [Network].
3 Select [Network Port Congurations]
from [Show], and then check that
[Built-in Ethernet] is selected.
4 Select [Built-in Ethernet] from [Show]
and select the [AppleTalk] tab, and
then check that [Make AppleTalk
Active] is selected.
5 Close [Network].
6 Insert “Software DVD-ROM” in the
computer.
7 Double-click the [OKI] icon on the
desktop.
8 Double-click [Driver] folder > [Printer]
folder > [Installer for Mac OSX].