Oki C831dn - Page 42

- 42 -
Connecting to a Computer
1
1. Setup
9 Enter the administrator’s password for
MacOS X, and then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
10 From the [Go] menu, select [Utilities]
and then double-click [Printer Setup
Utility].
Note
● If [Printer Setup Utility] is already running, close it
and open it again.
11 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].
12 Select the name of the printer where
[Connection] is [AppleTalk], and then
check that [OKI C831(PS)] is displayed
in [Print Using].
For Mac OS X 10.3.9, set as follows.
a Select [AppleTalk] from the pop-up
menu.
b Select the printer from the list.
c Select [Oki] from [Printer Model]
and then select [OKI C831(PS)]
from the driver list.
13 Click [Add].
14 Check that the name of your printer is
displayed in [Printer List], and then
close the window.
15 From the [Go] menu, select
[Applications] and then double-click
[TextEdit].
16 Select the [File] menu > [Page Setup].
17 Select the name of your printer from
[Format for].
18 Check that the [OKI C831(PS)] is
displayed correctly under [Format for].
19 Click [OK].
20 Remove “Software DVD-ROM” from the
computer.
 Next, enable the sleep mode on the
printer.
Note
● If using the EtherTalk, disable the sleep mode.
1 Press the <ENTER> button on the
operator panel.