Oki C910 - Page 108

108 – C910 Appendix B – Menu system
Low Toner Continue
Stop
Sets the printing operation
when insufficient toner is
detected.
Continue : the printer can
continue printing while
remaining online.
Stop : the printer stops
printing and goes offline.
Jam
Recovery
ON
OFF
ON : continues printing the
job, including any jammed
pages, once the jam has been
cleared.
OFF : Cancels a job including
the page currently jammed.
Error Report ON
OFF
ON : prints an error report
during the occurrence of an
internal error. This item is valid
only for PS and PCLXL.
Print
Position
Adjust
X Adjust 0.00
+0.25 –
+2.00
-2.00 – -
0.25 mm
0.00
+0.01 –
+0.08
-0.08 – -
0.01 in
Adjusts the position of the
whole printing image (0.25
mm, 0.01 in interval)
perpendicular to the direction
of paper movement (i.e.
horizontally).
Y Adjust
0.00
+0.25 –
+2.00
-2.00 – -
0.25 mm
0.00
+0.01 –
+0.08
-0.08 – -
0.01 in
Adjusts the position of the
whole printing image (0.25
mm, 0.01 in interval) parallel
to the direction of paper
movement (i.e. vertically).
Item Value Description