- 40 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
2
Gently raise the (blue) lever ( ), and
remove the image drum ( ) while
being careful not to touch the green
cylinder with your hands.
Note
Do not expose the image drum to direct sunshine
or strong light (approx. 1,500 lux or above). Do not
leave it for more than 5 minutes even under indoor
light.
Be careful not to touch or scratch the image drum
(green cylinder).
3
Place the image drum that has been
removed onto a at surface covered
with paper, and remove 4 stoppers
(orange) in the direction of the arrows.
To Next Page
Loading...
