What to do if my Oki All in One Printer says 'No NDS trees found'?
- PPenny ThompsonSep 18, 2025
If your Oki All in One Printer displays 'No NDS trees found', check that the frame types on the printer are properly configured.
What to do if my Oki All in One Printer says 'No NDS trees found'?
If your Oki All in One Printer displays 'No NDS trees found', check that the frame types on the printer are properly configured.
What to do if my Oki All in One Printer says 'All connections used. Remove server?'?
This message indicates that you have reached the maximum limit of eight bindery servers. To add another server, you will need to disconnect one of the existing ones.
Why does my Oki All in One Printer say 'Warning! Selecting a new NDS tree deletes Bindery setup.'?
This warning appears because the Oki All in One Printer was previously connected to a different NDS tree. To prevent deleting the bindery settings, select OK and then choose No when the message 'Delete Bindery setup and continue?' appears.
What to do if my Oki All in One Printer displays 'No NetWare file server found.'?
Check the cable connections and ensure that the NetWare server is turned on.
What does it mean if my Oki All in One Printer says 'No file server is selected'?
If your Oki All in One Printer displays 'No file server is selected', it means that no file server has been added in Bindery Setup.
Why does my Oki All in One Printer say 'No AppleTalk zone found'?
If your Oki All in One Printer displays 'No AppleTalk zone found', it could mean the Ethernet network cable isn't connected to the printer or the network, or that the AppleTalk network has no zones. Press Enter to continue.
How to clear paper jam in top cover of Oki All in One Printer?
To clear a paper jam in the top cover of your Oki All in One Printer, squeeze the top cover handle and open the top cover. Then, carefully remove any paper on the belt.
How do I clear a paper jam in the duplex unit of my Oki All in One Printer?
To clear a paper jam in the duplex unit of your Oki All in One Printer, open the duplex cover release button and carefully remove any jammed paper.
What to do if Oki All in One Printer says 'You must first enable a network port.'?
Enable at least one network port (Ethernet) in Port Setup before beginning Protocol Setup or Service Setup.
Why does my Oki All in One Printer say 'No NDS trees found.'?
Check to see that the frame types on the Fiery are properly configured.
print speed color | 36 ppm |
---|---|
print speed mono | 40 ppm |
time to first page color | 10.5 sec |
time to first page mono | 9 sec |
warm-up time | 110 sec |
resolution | 1200 x 1200 dpi |
processor | 1 GHz |
duty cycle | 150, 000 pages/month |
standard ram | 1, 024 MB |
---|---|
flash memory | 4 MB |
hard disk drive | 20 GB |
standard input | 760 sheets |
---|---|
optional input | 2nd/3rd universal tray (530 sheets each) |
maximum capacity | 2, 880 sheets |
paper sizes supported | up to 12.9" by 47.24" |
paper weight trays 1-5 | 17 lb.–57.5 lb. bond |
duplex printing | standard on C9800hdn |
power consumption typical | 750W |
---|---|
power consumption peak | 1500W |
power consumption idle | 200W |
acoustic noise operating | 54dB(A) |
size | 25.8" x 24.4" x 18.2" |
---|---|
weight | 152 lb. |
Identifies and labels the main physical parts of the printer.
Provides examples and instructions for loading paper into trays and using stackers.
Identifies and explains the buttons, lights, and indicators on the printer's control panel.
Instructions for safely powering the printer off and on.
Instructions for installing printer drivers and software from the supplied CD.
Guidance for dealing with paper jams in the printer.
Steps to clear paper jams accessible via the printer's side cover.
Instructions for clearing paper jams under the printer's top cover.
Steps to clear paper jams within the printer's duplex unit.
How to clear paper jams occurring around or within the finisher.
Specific instructions for clearing paper jams within the finisher unit.
Procedure for clearing paper jams in the finisher or punch unit.
Steps to clear paper jams within the inverter unit.
Instructions for clearing staple jams that occur in the finisher.