What to do if my Oki All in One Printer says 'All connections used. Remove server'?
If your Oki All in One Printer displays 'All connections used. Remove server?', it means you've reached the limit of eight bindery servers. To add another, you'll need to disconnect one of the existing servers.
What to do if my Oki All in One Printer says 'All connections used. Remove server?'?
This message indicates that you have reached the maximum limit of eight bindery servers. To add another server, you will need to disconnect one of the existing ones.
Why does my Oki All in One Printer say 'Warning! Selecting a new NDS tree deletes Bindery setup.'?
This warning appears because the Oki All in One Printer was previously connected to a different NDS tree. To prevent deleting the bindery settings, select OK and then choose No when the message 'Delete Bindery setup and continue?' appears.
What to do if my Oki All in One Printer displays 'No NetWare file server found.'?
Check the cable connections and ensure that the NetWare server is turned on.
How to fix 'Novell error code' on Oki All in One Printer?
This message indicates that Novell NetWare has reported an error. If troubleshooting the network yourself is not possible, you should notify the Novell administrator to troubleshoot the network.
Why does my Oki All in One Printer say 'No AppleTalk zone found'?
If your Oki All in One Printer displays 'No AppleTalk zone found', it could mean the Ethernet network cable isn't connected to the printer or the network, or that the AppleTalk network has no zones. Press Enter to continue.
What to do if my Oki All in One Printer says 'No NDS trees found'?
If your Oki All in One Printer displays 'No NDS trees found', check that the frame types on the printer are properly configured.
What does it mean if my Oki All in One Printer says 'No file server is selected'?
If your Oki All in One Printer displays 'No file server is selected', it means that no file server has been added in Bindery Setup.
What to do if Oki All in One Printer says 'You must first enable a network port.'?
Enable at least one network port (Ethernet) in Port Setup before beginning Protocol Setup or Service Setup.
Why does my Oki All in One Printer say 'No NDS trees found.'?
Check to see that the frame types on the Fiery are properly configured.
To Next Page
General
