C9800 User’s Guide> 51
C
ONNECTING
THE
USB
INTERFACE
Do not connect the USB cable at this time. You will be instructed
when to connect the USB cable when you run the Drivers CD,
CD1.
If you are connecting your printer directly to a stand alone
computer proceed to the section entitled “Using the Drivers CD”
on page 52.
C
ONNECTING
THE
NETWORK
INTERFACE
1. Turn off the printer and the computer.
2. Connect an Ethernet cable between the printer and an
Ethernet hub.
CAUTION!
Do not connect a USB cable into the network interface
connector as this may lead to malfunction.
To Next Page
Loading...
Need help?
General
