Oki C941 - Page 49

- 49 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
7
Close the access cover.
8
Tighten the access cover screws.
9
Connect the cables, and turn ON the
device power supply.
10
Check that the standby screen is
displayed in the liquid crystal panel.
11
Print the "Conguration".
Press either the scroll button
or
on the control panel to display the
"Functions" screen.
Memo

Print the "Conguration" on A4 size paper. Set A4
size paper in the paper feed tray.
12
Press the scroll button to select [Print
Information], and then press the [OK]
button.
13
When the [Conguration] have been
selected, press the [OK] button.
14
When [Execute] has been selected,
press the [OK] button.
15
Check that the HDD has been added to
the "Conguration".
Reference

“Printer Information” (P.54)