C9600 Utilities Guide
Storage Device Manager • 170
Forms
PCL
Step 4a: Add Files to the Project
1. Click Projects → Add File to Project.
The Open dialog box appears.
2. Highlight the.bin file you wish to add. Click Open.
The file name appears in the Project dialog box.
3. Repeat steps 1 and 2 until all the files you wish to include in the
project appear in the Project dialog box.
Step 4b: Delete Files from the Project
To delete a file from the project:
1. Click the file name.
2. Click Projects → Remove File from Project.
NOTE
An alternate way to add files to the project is:
1. Open either My Computer or Microsoft Explorer.
2. Browse to the directory where the prn files are stored.
3. Select the files and drag them into the Project box.
To Next Page
Loading...
Need help?
General
