C9600 Utilities Guide
Storage Device Manager • 171
Forms
PCL
Step 5: Check File Settings and Save the Project
1. To check the settings for the bin files, double-click the file name.
The Edit Component Name and ID dialog box appears.
Here you can edit the
• file name
• ID number (the number you need to enter in the printer driver
when printing overlays)
• volume:
0: = printer’s disk drive PCL partition
1: = printer’s disk drive Common partition
%disk0%: = printer’s disk drive PostScript partition
2: = Flash memory PCL
%Flash0% = Flash memory PostScript
• path.
2. Click OK.
3. When you’re through reviewing the settings, click
Projects → Save Project.
To Next Page
Loading...
Need help?
General
