230
14. Press the Online button to exit menu mode and return to the
Ready to print status.
Making Changes in the Boot Menu
1. Turn the printer OFF.
2. Press and hold the Enter button while turning the printer back
on: be sure to keep pressing the Enter button until [Initializing]
appears on the display.
3. Use the ∇ and ∆ buttons to scroll to an entry and the Enter
button to select the entry, until you reach the item you wish to
change.
4. Use the ∇ and ∇ buttons to scroll down to the setting you wish
to engage, then press the Enter button.
An Asterisk (*) appears next to the new setting.
5. Press the Online button to exit menu mode and return to the
Ready to print status.
To Next Page
Loading...
Need help?
General
