OkiLAN 8200e Network User’s Guide
31
TCP/IP Tab (Oki Device Setup)
8200e_AdminMgr_TCPIP_Tab.bmp
Item Comments
Use TCP/IP Protocol Enable/disable TCP/IP protocol.
Use DHCP/BOOTP Click to select this item if the IP address,
subnet mask, default gateway and IP
addresses for DNS primary server and
secondary servers are retrieved from the
DHCP or BOOTP server.
Use RARP Click to select this item if the IP address is
retrieved from the RARP server.
IP Address Set the IP address of the selected network
interface card.
Subnet Mask Set the subnet mask of the selected network
interface card.
To Next Page
Loading...
Need help?
General
