C9800 Utilities Guide
Storage Device Manager • 144
Forms
PostScript
Step 3a: Add Files to the Project
1. Click Projects → Add File to Project.
The Open dialog box appears.
2. Make sure PRN files (*.prn) is selected in the Files of type
drop-down list.
3. Browse to the folder where the files are saved. Select the files
you wish to add to the project. Click Open.
The Information dialog box appears.
4. Click OK.
The files are saved as HST.
5. Repeat steps 1 through 4 until you have added all the files you
wish to add to the Project.
Step 3b: Delete Files from the Project
NOTE
To delete a file from the project, click the file name.
Click Projects → Remove File from Project.
To Next Page
Loading...
Need help?
General
