C9800 Utilities Guide
Print Job Accounting Utility • 89
f. Set limits per 24-hour period for the Account ID by any or all of
the following:
• Tot al pag e s
• Total dollars
• Total minutes
• Total staples used
These limits are checked either at the selected interval or at the
time setting for the log.
g. Click Finish.
6. Repeat the previous step for each Account ID to be added.
7. Click End. Click OK.
NOTE
Usage is checked only at the set interval time.
If the limits are exceeded between checks, printing
continues even though the limit has been exceeded.
At the next interval check, the User is blocked from any
further printing until the next 24-hour period starts.
If you have so designated (see above), the User is
informed by email that they have exceeded their limits
for that 24-hour period.
To Next Page
Loading...
Need help?
General
