1
1-30 Installing User Software on a Windows Computer
ES3640e MFP EFI User’s Software Installation Guide - 30
Before you begin
• Configure the Fiery for SMB printing in Run Setup > Network
Setup > Service Setup > Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the
Control Panel Map, and on the Configuration page.
To set up SMB printing on Windows 98/Me
1. Run the OKI LPR utility on the Windows 98 PC.
This utility will have been installed along with the driver if you
installed it from the Drivers CD (CD1). If not, you will first need to
install it from the available utilities on that CD.
2. Choose Permote Print>Add Printer.
Choose the Printer Name of your ES3640e MFP from the list of
installed drivers.
3. Enter the ES3640e MFP’s IP address and any comments you wish to add.
Note:
You can also locate the printer using the Discover button.
If you are not able to locate your ES3640e MFP, contact your
network administrator.
To Next Page
Loading...
Need help?
General
