2
2-91 Installing Fiery software and fonts
ES3640e MFP EFI User’s Software Installation Guide - 91
Configuring the connection for Command
WorkStation LE for Mac OS X
The first time you start Command WorkStation LE, you are
prompted to configure the connection to the ES3640e MFP.
Before you begin
• Print the Configuration page from the Printer Control Panel and
note the IP address of the ES3640e MFP. See page 2-84.
To configure the connection for Command
WorkStation LE
1. Start Command WorkStation LE.
The Available Servers dialog box is displayed. All servers found in
the local subnet are displayed.
Note:The device name for the Fiery is ES3640e MFP.
2. If no Fiery servers were found, click the Manual tab to search by DNS
name or IP address. Click Add to add the server to the Available Servers
list.
To Next Page
Loading...
Need help?
General
