1
1-50 Installing User Software on a Windows Computer
ES3640e MFP EFI User’s Software Installation Guide - 50
Completing the Windows 2000/XP/Server 2003 parallel
port connection
The parallel port cable connects the Fiery to a single computer.
Once you have installed the Windows 2000/XP/Server 2003
PostScript printer driver and the Fiery printer description files,
complete the setup for parallel port printing.
To set up parallel printing for Windows
2000/XP/Server 2003
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start, and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose
Printers and Faxes.
2. Double-click the Fiery icon and choose Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is selected.
The Fiery is ready to accept parallel print jobs from your
computer, using the Windows 2000/XP/Server 2003 PostScript
printer driver and the Fiery printer description file.
3. Click the General tab and click Print Test Page.
4. To share the printer on the network, click the Sharing tab.
Select whether to share the printer, and specify the operating
systems used by
network clients.
5. Click OK to exit the Printer Properties dialog box.
To Next Page
Loading...
Need help?
General
