2
2-88 Installing User Software on a Mac OS Computer
ES3640e MFP EFI User’s Software Installation Guide - 88
8. With the ES3640e MFP selected in the list of available servers, click OK to
begin using Fiery Spooler.
Modifying the configuration
Edit the configuration whenever there is any change to your
ES3640e MFP or network, such as an IP address or device change.
Change the specific Fiery Setup information before configuring the
connection.
To modify the configuration
1. In the Chooser dialog box, click Option.
2. To edit information for a ES3640e MFP, select the ES3640e MFP by its IP
address or DNS name and click Modify. Edit information in the Settings
dialog box as necessary, and click OK.
3. To add a new ES3640e MFP, click Add. Configure the Settings dialog box
as outlined in steps 4 through 6 in the preceding procedure.
4. To remove a ES3640e MFP, select the Fiery by its IP address or DNS
name, and click Remove.
The list of available servers reflects the modifications you have
made.
Fiery name and device
name
(ES3640e MFP)
To Next Page
Loading...
Need help?
General
